Skip to the page

Our cookies help keep the site secure, hold your basket for you, count visits and tell us which ads lead to orders. Privacy policy

5% off every kit at checkout: use

5% off kits:

Basket
Menu
Search
Guides

3-Camera CCTV Kit: What It Covers and When to Add One

A 3-camera kit covers the front, back and one side. See what is in the box, which recorder leaves a spare port and when a 4-camera kit is the better buy.

By CCTV Kit Direct team3 min read

Mentioned in this article

A 3-camera CCTV kit covers the three places most houses and small units need watching: the front, the back and one side. If you also have a garage, a long side passage or a second door to watch, buy a 4-camera kit instead and use all four ports. Here is what a 3-camera kit gives you and how to choose between the ones we list.

What three cameras cover

Put the first camera on the front door and drive, the second on the back door and garden, and the third on the side passage, gate or the wall of a unit that is hardest to see from the road. That is the whole job of a 3-camera kit: one view per entrance, with nothing left over to point at a second corner. Walk round the building first and list every door, gate and ground-floor window you can reach. If the list is three, this size fits. If it is four or more, move up a size.

Recorder channels: why most 3-camera kits have a spare

A recorder has a fixed number of camera ports, called channels. Every 3-camera kit we list uses a recorder with more ports than cameras, so you have room to grow:

If you are sure you will add a fourth camera, a 4-camera kit saves you buying it separately. Our 4 camera kits use the same 4-channel recorders.

What is in the box

The 4-channel PoE kit lists a DS-7604NXI recorder, three Hikvision 5MP fixed bullet network cameras with a built-in microphone, a 1TB hard drive already fitted, a 1.5m HDMI cable and three 20m Cat6 network leads. One lead runs to each camera, and the recorder powers the cameras over that lead.

The coax kits swap those for an iDS-7204HQHI-M1/XT recorder with three 5MP turret cameras. Each camera has a 20m RG59 lead with video and power connectors, and a 12V 3A power supply with a 4-way splitter comes in the box. Each lead is 20m, so measure the run from the recorder to each camera before you order. A longer run needs a longer cable.

How many days a 3-camera kit records

The days depend on the drive and how much data each camera writes. As an example, three cameras recording non-stop at 2Mbps write about 64.8GB a day, so a 1TB drive holds about 15 days and a 2TB drive about 31. At 4Mbps those figures halve to about 7.7 and 15.4 days. These are worked examples, not promises: your real bitrate depends on the camera, its settings and the scene. Our storage calculator does the sum for your own settings.

Which 3-camera kit to pick

Choose PoE if you can run network cable to each camera, because it needs one lead per camera and no separate power. Choose coax if you are replacing an old analogue system or prefer a simple video-and-power lead. Pick the drive size from the days above. Everything in our 3 camera kits range comes with the drive fitted. Ask us before ordering if you are unsure which recorder size suits your plan.

Frequently asked questions

What does a 3-camera CCTV kit cover?

Three entrances or views, usually the front, the back and one side of a house or small unit. If you need a fourth view, buy a 4-camera kit.

Can I add a fourth camera to a 3-camera kit later?

Yes, if the recorder has a spare port. The 4-channel kits leave one free, and the 8-channel kits leave five.

How long does a 3-camera kit record?

As a worked example, three cameras at a steady 2Mbps fill a 1TB drive in about 15 days. Your real figure depends on camera settings and the scene.

Should I buy a 4-camera kit instead?

If you have four places to watch or may add a camera soon, yes. Otherwise a 3-camera kit on a 4-channel recorder gives you the same recorder with one port spare.

  • kits
  • 3 camera
  • recorder

Written by

CCTV Kit Direct team