

BNC Ground Loop Isolator, 75 Ohm, 600V DC Isolation, 68x28x21mm Plastic and Metal Body
In stock
About this item
Rolling bars or a distorted picture on a camera that otherwise works can come from a ground loop. This BNC ground loop isolator fits between the camera and the recorder and breaks that loop, which filters out the interference and noise.
It has 75 ohm coaxial input and output resistance, ground isolation of more than 90dB at 50Hz and an isolation voltage of DC 600V (minimum). The body is black plastic and metal and measures 68 x 28 x 21mm.
If one channel in a kit shows interference that the others do not, fit this in that camera's video line before you change any cable. It connects with BNC connectors, so it suits coax runs.
What it does
- BNC connectors, 75 Ohm input and output
- Ground isolation above 90dB at 50Hz
- Isolation voltage 600V DC minimum
- Frequency response 20Hz to 10MHz
- Body 68 x 28 x 21mm with a 24cm lead
Specifications
| Dimensions | 68 × 28 × 21 mm |
|---|---|
| Voltage | 600V |
| Connector Type | BNC |
| Material | Plastic |
| Colour | blackBNC Ground Loop Isolator |
Other parts you may like


Grey IP55 ABS Plastic Junction Box 80x50mm, Small Waterproof Box for Outdoor Cable Joints
Camera Bracket and Junction Box
In stock
£1.30
UKVISION Plastic Camera Base Box for Dome, Turret or Bullet Cameras, White, 120mm by 50mm
Camera Bracket and Junction Box
In stock
£3.86

UKVISION Deep Base Box for Dome or Turret Cameras, White Plastic, 120mm Wide, 55mm Deep
Camera Bracket and Junction Box
In stock
£7.86

UKVISION Grey Metal Deep Camera Base for Dome or Turret Cameras, 93mm Wide, 42mm Deep
Camera Bracket and Junction Box
In stock
£7.60


