

1 of 4
Black HDMI-A Male to Male Lead, 10m Run to a Far Monitor, 4K at 60Hz, High Speed with Ethernet
In stock
About this item
This 10m HDMI cable is built for the run from a CCTV recorder to a monitor that sits further away than a short lead allows. Both ends are HDMI Type A male, so it plugs into the HDMI output on the recorder and the HDMI input on a TV or monitor.
It is a High Speed cable that carries 4K at 60Hz with a bandwidth of 18Gbps, so the picture from higher-resolution cameras can be shown at full quality. The connectors are gold-plated, the conductors are 24AWG oxygen-free copper and the cable has foil and braid shielding against interference from nearby network and power cables. The jacket is black.
Measure the route from recorder to screen before ordering, allowing for corners and cable clips. If the run is longer than 10m, ask us before ordering and we will advise.
What it does
- 10m Type A male to male
- HDMI 2.0, 4K at 60Hz, 18Gbps
- Supports HDR and HDCP 2.2
- Triple shielding, gold-plated contacts
- Overmoulded strain relief
Specifications
| Product Type | High Speed HDMI Cable |
|---|---|
| Connector Type B | HDMI Type A Male (19-pin) |
| Cable Length | 10 |
| HDMI Version | 2.0 High Speed |
| Max Resolution | 4K (3840x2160) @60Hz |
| Bandwidth | 18 Gbps |
| Shielding | Triple (Foil + Double Braid) |
| Conductor Material | Oxygen-Free Copper (OFC) |
| Wire Gauge | 24-28 AWG |
| Jacket Material | PVC / Nylon Braid |
| Outer Diameter | 7-10 |









