An 8-channel recorder has eight camera channels, and the PoE recorder in our PoE kits takes up to eight cameras, one on each channel. A kit with four cameras on an 8-channel recorder leaves four channels free, and a kit with eight cameras uses them all. So the number in the kit title tells you how many channels the recorder has, not how many cameras come in the box.
What a channel is
A channel is one camera input on the recorder. The Hikvision DS-7608NXI-K1/8P in our PoE kits has 8 channels and supports up to 8 IP cameras. The recorder in our coax kits is an 8-channel recorder too. Our kit titles start with the channel count, for example “Hikvision 8-Channel 5MP CCTV Kit — 4 Cameras + 4TB Recording”, and then say how many cameras are in the box.
How many cameras come with it
We list 127 kits built on an 8-channel recorder. 33 of them have eight cameras. The other 94 have between one and seven, so they leave channels free. If you only need four spots covered today but may want more later, an 8-channel kit with four cameras gives you the room without a second recorder. The 8 camera kits category holds the full sets; the kits with fewer cameras sit in the category for their camera count.
PoE sockets and channels
On a PoE recorder the channels and the power sockets line up. The DS-7608NXI-K1/8P has 8 PoE interfaces, so each camera plugs into the recorder with one network cable and gets its power from it. The 4-camera PoE kit with 4TB uses four of the eight sockets and comes with four 20m Cat6 cables. The 8-camera PoE kit with 4TB uses all eight and comes with eight. All of these sit in IP (PoE) kits.
Coax kits: check the power supply
In a coax kit each camera has its own power lead. The 4-camera coax kit with 4TB comes with a 12V 3A power supply with a 4-way splitter and four 20m BNC and power leads. The 8-camera coax kit with 2TB comes with a 12V 5A power supply with a built-in 8-way splitter and eight leads. So adding a fifth camera to the 4-camera kit means more than a free channel: its 12V 3A supply has a 4-way splitter, so a fifth camera needs its own power.
The hard drive
Both recorders have one SATA interface, so they take one hard drive, and the kit's drive is already installed. The DS-7608NXI-K1/8P takes up to 10TB for that drive. More cameras recording means the drive fills faster, so pick the drive size for the number of cameras you expect to run, not just the number in the box today.
When eight is not enough
On the PoE recorder a ninth camera needs a bigger recorder. For the choice between 8 and 16 channels read our guide to 16-camera CCTV kits. If you are choosing between PoE and coax, pick that first: the cameras and recorder in a kit are made for each other.





