1 of 2
Our cookies help keep the site secure, hold your basket for you, count visits and tell us which ads lead to orders. Privacy policy
Answer a few simple questions and we will narrow it down.
Help me chooseSee every kitRather pick the parts yourself? Use the kit builder1 of 2
UKVISIONModel UK-SW-4-100-P
Available
The UKVISION UK-SW-4-100-P is a small PoE switch for a kit that is full but needs a few more cameras. Four ports supply power and data to IP cameras, and two more ports connect upward to your recorder, router or another switch.
All ports run at 10/100Mbps, which is plenty for ordinary IP camera streams. The PoE ports follow IEEE 802.3af/at and give up to 30W each, but the total budget is 65W, so four cameras of 10W or so are fine and larger ones need adding up first.
A built-in digital display shows PoE power consumption as it happens, so you can see how close to the limit you are after adding a camera. Extend mode carries data up to 250 metres at reduced bandwidth, and VLAN mode isolates ports to reduce broadcast traffic.
There is nothing to configure: the switch is unmanaged and works as soon as it is connected. It suits residential and small commercial systems.
If you want faster ports, choose the gigabit version, the UK-SW-4-1000-P. For longer runs, plan to use Extend mode and expect a lower speed. Tip: if the display shows the load close to 65W, add up the cameras again before connecting another device to this switch, because the budget is shared across all four ports.
| Brand | UKVISION |
|---|---|
| Power | 30W |
| Barcode (GTIN) | 5061009050866 |
|---|---|
| Also known as | GR-UK-SW-4-100-P-LN |
Four, using the four PoE ports. The other two ports are uplinks.
65W, shared across the ports, with up to 30W at any one port.
It allows runs of up to 250 metres, at reduced bandwidth.
No. All ports are 10/100Mbps. The UK-SW-4-1000-P is the gigabit model.
8 ports
Available
£38.42
4 ports
Available
£50.47
